Calling external functions in C, and calling C functions from other languages, is a common issue in OS programming, especially where the other language is assembly. This page will concentrate primarily on the latter case, but some consideration is made for other languages as well.
Some of what is described here is imposed by the x86 architecture, some is special to the GNU GCC toolchain. Some is configurable, and you could be making your own GCC target to support a different calling convention. Currently, this page makes no effort of differentiating which is what.
As a general rule, a function which follows the C calling conventions, and is appropriately declared (see below) in the C headers, can be called as a normal C function. Most of the burden for following the calling rules falls upon the assembly program.
Here is a quick overview of common calling conventions. Note that the calling conventions are usually more complex than represented here (for instance, how is a large struct returned? How about a struct that fits in two registers? How about va_list's?). Look up the specifications if you want to be certain. It may be useful to write a test function and use gcc -S to see how the compiler generates code, which may give a hint of how the calling convention specification should be interpreted.
|Platform||Return Value||Parameter Registers||Additional Parameters||Stack Alignment||Scratch Registers||Preserved Registers||Call List|
|System V i386||eax, edx||none||stack (right to left)1||eax, ecx, edx||ebx, esi, edi, ebp, esp||ebp|
|System V X86_642||rax, rdx||rdi, rsi, rdx, rcx, r8, r9||stack (right to left)1||16-byte at call3||rax, rdi, rsi, rdx, rcx, r8, r9, r10, r11||rbx, rsp, rbp, r12, r13, r14, r15||rbp|
|Microsoft x64||rax||rcx, rdx, r8, r9||stack (right to left)1||16-byte at call3||rax, rcx, rdx, r8, r9, r10, r11||rbx, rdi, rsi, rsp, rbp, r12, r13, r14, r15||rbp|
|ARM||r0, r1||r0, r1, r2, r3||stack||8 byte4||r0, r1, r2, r3, r12||r4, r5, r6, r7, r8, r9, r10, r11, r13, r14|
Note 1: The called function is allowed to modify the arguments on the stack and the caller must not assume the stack parameters are preserved. The caller should clean up the stack.
Note 2: There is a 128 byte area below the stack called the 'red zone', which may be used by leaf functions without increasing %rsp. This requires the kernel to increase %rsp by an additional 128 bytes upon signals in user-space. This is not done by the CPU - if interrupts use the current stack (as with kernel code), and the red zone is enabled (default), then interrupts will silently corrupt the stack. Always pass -mno-red-zone to kernel code (even support libraries such as libc's embedded in the kernel) if interrupts don't respect the red zone.
Note 3: Stack is 16 byte aligned at time of call. The call pushes %rip, so the stack is 16-byte aligned again if the callee pushes %rbp.
Note 4: Stack is 8 byte aligned at all times outside of prologue/epilogue of function.
System V ABI
- Main article: System V ABI
The System V ABI is one of the major ABIs in use today and is virtually universal among Unix systems. It is the calling convention used by toolchains such as i686-elf-gcc and x86_64-elf-gcc.
In order to call a foreign function from C, it must have a correct C prototype. Thus, is if the function fee() takes the arguments fie, foe, and fum, in C calling order, and returns an integer value, then the corresponding header file should have the following prototype:
int fee(int fie, char foe, double fum);
Similarly, an global variables in the assembly code must be declared extern:
extern int frotz;
C functions in assembly or other languages must be declared as appropriate for the language. For example, in NASM, the C function
int foo(int bar, char baz, double quux);
would be declared
Also, in most assembly languages, a function or variable that it to be exported must be declared global:
global foo global frotz
In some object formats (a.out), the name of a C function is automagically mangled by prepending it with an underscore ("_"). Thus, to call a C function foo() in assembly with such a format, you must define it as extern _foo instead of extern foo. This requirement does not apply to most modern formats such as COFF, PE, and ELF.
C++ name mangling is much more severe, as the C++ compiler encodes the type information from the parameter list into the symbol. (This is what enables function overloading in C++ in the first place.) The Binutils package contains the tool c++filt that can be used to determine the correct mangled name.
The general register EBX, ESI, EDI, EBP, DS, ES, and SS, must be preserved by the called function. If you use them, you must save them first and restore them afterwards. Conversely, EAX and EDX are used for return values, and thus should not be preserved. The other registers do not need to be saved by the called function, but if they are in use by the calling function, then the calling function should save them before the call is made, and restored afterwards.
Passing Function Arguments
GCC/x86 passes function arguments on the stack. These arguments are pushed in reverse order from their order in the argument list. Furthermore, since the x86 protected-mode stack operations operate on 32-bit values, the values are always pushed as a 32-bit value, even if the actual value is less than a full 32-bit value. Thus, for function foo(), the value of quux (a 48-bit FP value) is pushed first as two 32-bit values, low-32-bit-value first; the value of baz is pushed as the first byte of in 32-bit value; and then finally bar is pushed as a 32-bit value.
To pass arguments to a C function, the calling function must push the argument values as described above. Thus, to call foo() from a NASM assembly program, you would do something like this
push eax ; low 32-bit of quux push edx ; high 32-bit of quux push bl ; baz push ecx ; bar call foo
Accessing Function Arguments
In the GCC/x86 C calling convention, the first thing any function that accepts formal arguments should do is push the value of EBP (the frame base pointer of the calling function), then copy the value of ESP to EBP. This sets the function's own frame pointer, which is used to track both the arguments and (in C, or in any properly reentrant assembly code) the local variables.
To access arguments passed by a C function, you need to use the EBP an offset equal to 4 * (n + 2), where n is the number of the parameter in the argument list (not the number in the order it was pushed by), zero-indexed. The + 2 is an added offset for the calling function's saved frame pointer and return pointer (pushed automatically by CALL, and popped by RET).
Thus, in function fee, to move fie into EAX, foe into BL, and fum into EAX and EDX, you would write (in NASM):
mov ecx, [ebp + 8] ; fie mov bl, [ebp + 12] ; foe mov edx, [ebp + 16] ; low 32-bit of fum mov eax, [ebp + 20] ; high 32-bit of fum
As stated earlier, return values in GCC are passed using EAX and EDX. If a value exceeds 64 bits, it must be passed as a pointer.